In the heart of Manama’s vibrant industrial sector, Ahmer Steel has established itself as a trusted partner for quality steel solutions. We are proud specialists in supplying ARCELOR 450 Sheet and Plates, bringing the strength of a renowned international standard directly to our clients across Bahrain and the region. Our dedication lies in providing not just materials, but reliable performance and expert support, ensuring your projects are built on a foundation of exceptional quality and dependability right from the start.
ARCELOR 450 is an advanced grade of high-strength, low-alloy steel. Its specific composition is engineered to deliver an impressive combination of strength and toughness. The “450” in its name denotes a minimum yield strength of 450 megapascals, meaning it can withstand significant stress before it begins to deform. This makes the material far stronger than conventional carbon steel, while retaining good formability and weldability for fabrication. It’s a material designed for demanding environments.
Item: ARCELOR 450
Thickness : 5mm to 150mm
Length : 6,000mm to 12,000mm
Width : 1,500mm to 2,500mm
Heat Treatment: N, Q+T
Surface Point : EP, PE, HDP, SMP, PVDF
| Plate Thickness MM | %C Max | %Mn Max | %P Max | %S Max | %SI Max | %Cr Max | %Ni Max | %Mo Max | B Max | CE Max | PCM Max |
| 6.0 – 20.0 | 0.52 | 0.34 | |||||||||
| 21.0 – 40.0 | 0.30 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.60 | 0.60 | 0.040 | 0.60 | 0.40 |
| 41.0 – 50.0 | 0.65 | 0.50 |
| Â | Hardness HBW | Typical yield strength MPa, |
| mm | (min – max 1) | not guaranteed |
| 3 – 80 | 425 – 475 | 1100 – 1300 |
| (80) – 100 | 410 – 475 | 1050 – 1300 |
| (100) – 130 | 390 – 475 | 1000 – 1300 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
The superior strength of ARCELOR 450 Sheet and Plates makes them ideal for a wide array of challenging applications. You’ll commonly find this material used in the construction of heavy equipment, robust machinery frames, and in the demanding mining and quarrying industries. It is also perfectly suited for structural components in large buildings, transportation trailers, and any situation where reducing weight without sacrificing integrity is a key priority. Essentially, it’s the go-to choice when a project requires a material that can handle substantial loads and resist wear over time.
Ahmer Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Manama, Bahrain.
Copyright 2025 Ahmer Steel. All rights reserved
